Alongside the launch of its 700 Vario Gen 7, Fendt presented a new range of harvesters up to 260 hp, the Corus 500. This includes nine five-strawwalker models with a working width of up to 7 .60 m.The Corus 500 replaces the old shaker models 5185 E and 5225 E. The 500 series develops from 185 hp to 260 hp with the Corus 518 (185 hp), Corus 522 (225 hp) and Corus 526 (260 hp).A 4.9 l Agco Power 4-cylinder engine powers the Corus 518. The Corus 522 and 526 are equipped with a 7.4 l Agco Power 6-cylinder engine.These two blocks meet the Stage V anti-pollution standard with a diesel oxidation catalyst (DOC) combined with a Crossversal Structure Design (CS) SCR system and an exhaust gas recycling system.A new electro-hydrostatic transmission is available from the entry-level models, and thus equips all Corus 500 models. It includes two modes: a road mode, which reduces engine speed and lowers consumption, and a field mode , where maximum RPM is available as needed.The cabin has been redesigned.The multifunction joystick, directly connected to the armrest, controls the speed, the cutter bar and the unloading auger.Concave and sieve adjustment is now controlled from the cab.As an option, two cameras are offered.These machines can accommodate PowerFlow and FreeFlow headers with a working width of up to 7.60 m.The automatic cutting height control system and the TerraControl II cutterbar adjustment system are operated directly from the cab.The Multi Crop Separator (MCS), with an additional threshing system, is available as an option for all models.Different baskets are available for use in cereals, corn or rice.The cleaning surface of the machine is announced at 4.70 m².The Corus 518 is available as standard with a 5,200 l hopper and an emptying capacity of 72 l/s.In the case of the Corus 522 and Corus 522 MCS, it is possible to choose a 6,500 l hopper as an option.The emptying capacity is then 85 l/s.The Corus 526 and 526 MCS are fitted with a large hopper as standard.Big Tractors Passion 23 rue Dupont-des-Loges 57000 Metz Tel.: 03 87 69 18 18